Clarion SIRIUS CLHK - Manual (Page 10)

Home Installation Guide 8
2. Gently lift the receiver upwards.
Removing the receiver
1 2 3 4 5 6 7 8 9 0
POWER
JUMP MEMO BAND MENU
DISP
CAT
Place the antenna on a relatively flat surface.
Determine the best position
1. Plug the antenna into the connector on the side
of the cradle.
2. Place the antenna at the preferred location
inside or outside your home.
3. Press the power button to turn the Plug and
Play receiver’s power on.
4. Check the signal strength indicator in the
bottom left corner of the display.
If necessary, move the antenna to different
positions until the signal comes loud and clear.
7. Mount the antenna
Clarion_SIRIUS_PnP_Shuttle_Home_Installation_Guide.book Page 8 Tuesday, February 1, 2005 5:55 PM