Installation ii, On ceilings/joists) – Panasonic FV-20NLF1 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION II
(ON CEILINGS/JOISTS)
1. Attach installation bracket and bracket to the unit body.
(Fig.6>
CAUTION
Inserì the installation bracket into the bracket covef
attached to the panel.
2.
Extend installation bracket and put the unK on the ceiling
or (oist Secure with long screws. (Fig.7)
3.
Remove junction box cover and secure oornkiit or wire
holder to jur>ction box cover knockout hole. (Fig.S)
4.
Using wire nuis< connect house power wire as shown in
the wihr^ diagram on page 6.
CAUTION
Mount junction box oovor caretutty so that wires are rxM
pinched.
S. Install circular ducts (on both ends) and secure №em
with tape or clamps.
ConsuR table 3 for the appropriate duct sues.
Olmertsion: mm(ir>ch)
MODEL
10NLFI
20NLFI
30NLFI
40NLR
d u c t
0
1 0 2
1 5 2
1 5 2
2 0 3
( 4 )
( 6 )
( 6 )
( 8 )
UTQ SOW
(table 3)
OreUarduci
vlortQ icrtw