Panasonic SR-42FZ - Manual (Page 4)

HOW TO USE
^ Measure rice with the measuring cup provided. One cup of uncooked rice makes
' approximately 3 cups of cooked rice by volume. Rinse rice in a separte bowl until
water becomes relatively clear.
O Place rinsed rice in the pan. Add water according to the following standard.
Using the markings on the pan
e.g.To cook 15 cups of rice, rinse the
rice, put it into the pan and then
add water to LEVEL INDICATOR 15.
LEVEL INDICATOR
MAX. LEVEL:
Do not cook more
than this amout.
Using the measuring cup
Raw rice by cup
Water to be
added
23 cups.................... .... 23-23V4 cups
20 cups.................... ... 20-20V4 cups
15 cups................... . . . . 15-15V4 cups
10 cups................... . . . . IO-IOV 4 cups
5 cups.................. ........ 5-5V4 cups
Adjust water quantity to your taste.
Set the pan in the cooker. To place it correctly on the
heater, turn the pan gently to right and left. Cover with
the lid and let rice soak approximately 30 minutes.
Plug in. Be sure the wall outlet has a ground terminal.
Do not plug in until ready to cook. Otherwise, rice may be
ruined.
If the pan is not in the cooker, cooking will not begin.
Ground
terminal
Press the switch a red " Cooking " lamp tells you cooking has ^
started ’
6
When rice is done, the switch will pop up and the "Cooking" lamp goes out.
7
After the switch pops up, leave the lid closed for at least 15 minutes to steam rice.
0 Unplug after use. Grasp the plug, not the cord.
—
3
-