Century PM-1873AA - Manual (Page 5)

1 Lay bassinet on flat surface
and spread open.
2
Rotate and extend four (4)
Hooks until they “click” in
place.
3 If floorboard is installed in
Playard/Crib, remove
floorboard.
4 Fold Floorboard into “W”
shape and place in center
of bassinet.
6 Place floorboard in Playard/Crib
with padded side facing up.
NOTE: DO NOT install floorboard if using
bassinet. Go to bassinet assembly section.
7 Secure ends of floorboard to
Playard/Crib:
• Pass Attachment Straps
through holes in
Playard/Crib floor.
• Secure straps to underside
of Playard/Crib floor.
Playard/Crib assembly is now complete
and ready to use.
4
ASSEMBLY and USE continued
WARNING
To prevent child from
suffocating, attachment
straps MUST be secured
to underside of
Playard/Crib.
Bassinet
Attachment
Strap
WARNING
Avoid serious injury or death:
• Use bassinet with infant who weighs less
than 8.2 kg (18 lbs.) and is less than
63.5 cm (25 inches) tall.
• DO NOT use without floorboard being
properly placed in bassinet.
• Discontinue use of bassinet if infant can
push up on hands and knees or sit
unassisted.
• DO NOT carry bassinet with infant in it.
• DO NOT use as a car bed.
• SUFFOCATION HAZARD: To help prevent
suffocation from entrapment, use only
floorboard provided by Century. NEVER
use additional mattress or padding.
Floorboard
Hook
Draft Guard may be lowered by
releasing the three (3) Tie Straps.
CAUTION:
Draft guard and infant
canopy DO NOT protect
against heat exposure
and sunburn.
Draft Guard
Tie Straps Draft
Guard