Mowtoop^te, Other features, A. to activate program lock – Panasonic NE-1064F User Manual
Page 14: B. to release program lock, Ip m, Other features a. to activate program lock
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MowtoOp^te
Other Features
A. To Activate Program Lock:
This procedure “Locks” the control panel Memory Pads into their programmed heating times and power
levels. DO NOT OPEN THE DOOR. The Display Window must be blank before the
Display
Window
Program Lock feature can be activated.
1.
PROG
•Press and hold in the
PROG
Pad
until the display shows “P” and “L”.
(for 6 seconds)
•Program Lock feature is now
activated.
IP M
NOTE:
«Do not press
PROG
Pad for longer than 30 seconds continuously, or false failure code may result.
• In “Program Lock"
a. To activate preset programs, open door will display “0".
b. The oven is started by pressing the desired Memory pad. There is no need to press the
START
pad.
c. The interrupt feature is deactivated—opening the door cancels the remaining time on the
program.
d. The oven cannot be programmed until the program lock feature is deactivated.
B. To Release Program Lock:
This procedure deactivates “Program Lock” and activates all other features. Oven reverts to a 2 touch
operating mode (Memory Pad plus
START
Pad).
DO NOT OPEN THE DOOR. The Display Window must be blank before the Release
Program Lock feature can be activated.
Display Window
1.
STOP/
RESET
PROG
•Press the
STOP/RESET
Pad and
while pressing this pad, press the
PROG
Pad until the display shows
“P” (for 6 seconds).
•Program Lock Feature is deactivated,
oven is now in "Program Unlock" mode.
NOTE;
*Do not press
PROG
Pad for longer than 30 seconds continuously, or false failure code may result.
•In “Program Unlock”
a. Repeat and interrupt features are operational.
b. Memory Pads can be programmed.
c. Tone loudness control is operational.
1 4 -