Kofax DOKuStar Validation - Manual (Page 9)

DOKuStar Validation User Manual Starting DOKuStar Validation • 5
Starting DOKuStar Validation
Starting DOKuStar Validation in Administrator Mode
To be able to develop project specific scripts you have to execute DOKuStar Validation in Administrator
Mode . To do this, DOKuStar Validation must be started from a DOS prompt with the command line parameter –a :
Open a DOS box and change to the directory .\bin in the installation directory of DOKuStar Validation. Enter
dsval.exe –a .
It is also possible to start DOKuStar Validation in Administrator Mode by using the script file
StartValidation.vbs . You will find this script in the .\Examples\Start_AdminMode directory of your
DOKuStar Validation installation.
When Validation is started from a command prompt or through the script file, an empty DOKuStar Validation
window appears.
Figure 1-1: DOKuStar Validation in Administrator Mode
From the File menu select New to create a new DOKuStar Validation project file, or use Open to open an existent
DOKuStar Validation project file with extension .vpj .