Solid brass handles – Jaclo 28"-29 PVC bath waste and overflow subassembly (no trim) - 376-LT-" User Manual
Page 2
| PG 2
PVC CABLE DRAINS
Solid Brass Handles
6
7
Tighten screw via the access hole in handle.
Apriete el tornillo vía el hoyo de acceso en el asidero.
Set plunger to recommended min. ½" opening, adjust as necessary.
Ajuste el tapon hasta una abertura min ½".
To operate drain, simply turn handle 1/8 turn (clockwise opens, counter-clockwise closes).
NOTE: Hex nut to be flush
against flat spot on shaft.
This manual is related to the following products:
- 23"-27 PVC bath waste and overflow subassembly (no trim) - 374-LT-" 17"-22 PVC bath waste and overflow subassembly (no trim) - 372-LT-" 12"-16 PVC bath waste and overflow subassembly (no trim) - 370-LT-" 28"-29 PVC bath waste and overflow special assemblies - 376-" 23"-27 PVC bath waste and overflow special assemblies - 374-" 17"-22 PVC bath waste and overflow special assemblies - 372-" 12"-16 PVC bath waste and overflow special assemblies - 370-"