Jaclo Value toilet tank trip lever to fit most standard toilets - 934- - Manual (Page 2)

jaclo industries | 129 Dermody Street Cranford, NJ 07016
p 908.653.4433 | 800.852.3906 f 908.653.1717 | 800.852.4133
JACLO.COM
| PG 2
REVISED OCTOBER ‘09
DECORATIVE WALL BAR
PARTS
POSITIONING OF WALL BAR
INSTALLING hOSe & hANDShOWeR
PRePARING FOR INSTALLION
› Wall bar with slider and bottom water supply outlet
› 2 Escutcheons
› 2 Screws
› 2 Anchors
› Allen wrench
› Determine convenient height for placement of wall bar
(water outlet top or bottom).
› Rough in plumbing accordingly.
› Screw hose on to bottom threads.
› Insert handshower into the slide mechanism.
› Adjust the height of handshower by simply pressing the
button on top of slider and sliding to your desired height.
› Seperate top water supply elbow off of wall bar, by
pulling downward from bar.
› Remove nipple from water supply elbow by pulling threads
outward, away from water elbow.
› Install nipple into rough in plumbing and secure tightly using
hex wrench (not supplied).
› Temporarily install wall bar to wall and using a marking tool,
trace around top post of wall bar to mark location of top
post.
› Using provided mouting post and screws, secure into
wall where marking is located.
› Place escutcheons over mounting post and nipple against
wall.
› Place wall bar against escutcheons.
› Once proper fit is achieved, tighten set screws securely.