Jaclo Towel ring - 4830-TR- - Manual (Page 3)

SINGLE POST INSTALLATION FOR:
ROBE HOOK, TOWEL RING & T.P. HOLDER
DOUBLE POST INSTALLATION FOR:
TOILET PAPER HOLDER, TOWEL BAR & GLASS SHELF
1 › Place mounting post (1) on wall in desired location and mark
location of mounting holes (see figure 1).
2 › Select the hardware (2&3) or (4) that best suits your application
and secure mounting post (1) to wall (see figure 2).
3 › Place mounting post (1) on wall in desired location and mark
location of mounting holes (see figure 1).
4 › Slide accessory post (6) (various with accessory) onto mounting
post (1) until it touches the top of escutcheon (5) and secure with
set screw (7).
1 › Select hardware (2&3) or (4) and attach both mounting posts (1) to the wall
using the top mounting hole only (see figure 4). Select correct center line for
accessory (see to right). Tighten mounting screw lightly. Do not secure.
2 › Loosely assemble accessory with accessory post (6) onto mounting post.
Adjust mounting post as shown and mark location for second mounting
screw (see figure 5).
3 › Remove accessory and secure mounting post to wall using remaining hardware.
4 › Thread escutcheon (5) (style varies) onto mounting post (1).
5 › Slide accessory with accessory post (6) onto mounting post (1) until it touches
the top of escutcheon (5) and secure with set screw (7).