Inovonics FA130 - Manual (Page 3)

Using the FA130
ENTERING ACCESS CODES: The FA130 "reads" access code keypresses on a first-in-first-out
basis. When an arming key or OFF is pressed, the keypad transmits only the last four digits
entered. If the user makes an error entering an access code, it is only necessary to re-enter the
correct code before pressing an arming key or OFF. If an arming key is not pressed within
15 seconds, the keypad will clear any input data.
TO ARM THE SYSTEM: enter the access code, and press the STAY, AWAY or CUSTOM key.
The Transmit LED will light indicating that the keypad is sending data.
TO ARM THE SYSTEM (EZ ARMING ENABLED): Press ENTER followed by STAY, AWAY or
CUSTOM. Normal entry and exit delays will be in effect. FOR INSTANT MODE: Press the STAY
or the CUSTOM key again during the delay period. All delayed points will be armed as instant.
TO DISARM THE SYSTEM: Enter an access code-and press the OFF key.
TO HEAR ARMING STATUS from the nearest hardwire keypad or from an audio speaker
connected to the control panel: Press the REVIEW key on the FA130 keypad. See Figure 4 for
descriptions of various status tones.
OFF (DISARMED) ARMING AWAY MODE
ARMING HOME MODE
ARMING CUSTOM
Figure 4: Arming Status Tones
OTHER STATUS TONES: The Vision Plus or Wireless Guardian™ system will generate status
tones from the hardwire executive keypad and the audio output as shown in Figure 5.
ALARM ON SENSOR
PROGRAMMED
AUDIBLE = "YES"
ENTRY or EXIT CHIME
FIRE ALARM OR
KEYPAD FIRE ALARM
SENSOR INACTIVE OR
LOW BATTERY
(7-SECOND INTERVAL)
SYSTEM NOT READY
(WHEN ARMING) DELAY SENSOR TR
(2-SECOND INTERV
ALARM HAS OCCURRED
(WHEN DISARMING)
DISARMING
Figure 5: Panel status tones
Using the Emergency Alert Keys
POLICE
SPECIAL
EMERGENCY
STAY
AWAY
CUSTOM
OFF
REVIEW
CHIME
ENTER
FIRE
Figure 6: FA130 function keypad
NOTE: TO USE EMERGENCY ALERT KEYS, EZ ARMING MUST BE ENABLED.
Keypad emergency alarms can be activated by pressing the ENTER key, followed by the
appropriate key. (See Figure 6.) The CHIME function, activated by pressing ENTER, then
CHIME, is available regardless of the EZ ARMING status. These keys activate the system
alarm and send a keypad emergency code to the monitoring station, if selected.
TO SEND A KEYPAD FIRE ALERT:
ENTER FIRE
TO SEND A KEYPAD POLICE ALERT:
POLICE ENTER
TO SEND A KEYPAD SPECIAL ALERT:
SPECIAL ENTER
TO SEND A KEYPAD EMERGENCY ALERT:
EMERGENCY ENTER
TO TURN CHIME ON AND OFF:
CHIME ENTER
The chime function is always available. It silences or activates the chime feature on
disarmed intrusion points which have been programmed with chime enabled.