Cuisinart DLC-2A Series - Manual (Page 3)

SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD
USE ONLY
NOTICE
This appliance has a polarized plug (one blade is
wider than the other). As a safety feature, this
plug will fit only one way in a polarized outlet. If
the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this
safety feature.
INTRODUCTION
The Cuisinart ® Mini-Prep ® Plus Processor
handles a variety of food preparation tasks
including chopping, grinding, puréeing, emulsify-
ing and blending. The patented auto-reversing
blade provides a super-sharp edge for the
delicate chopping of herbs and for blending and
puréeing other soft foods, while the blunt edge
offers a powerful cutting surface to grind through
coffee beans, spices and other hard foods. Pulse
activation gives maximum control for precision
processing, whether chopping or grinding.
The powerful high-speed motor works hard and
fast to accomplish any small job with ease.
Chop herbs, onions, garlic; grind coffee beans,
spices, hard cheese; purée baby foods; blend
mayonnaise and flavored butters, all with the
same compact appliance. The Mini-Prep
® Plus
Processor takes up minimum counter space and
stores neatly on the countertop or in a cabinet.
DLC-2A ASSEMBLY
INSTRUCTIONS
1. With the base unit on the tabletop, place
the work bowl over the center stem and turn
slightly to the right, until bowl drops down to
the bottom of the stem.
2. Turn the work bowl counterclockwise to
lock onto base.
3. CAREFULLY PICK UP THE BLADE BY ITS
HUB and place on the center stem until it
drops to the bottom of the stem. NEVER
TOUCH THE BLADE ITSELF.
4. Add food ingredients.
5. Place the cover on the work bowl with the
long tab to the right of the rear column.
6. Turn cover counterclockwise to securely
lock into locking post.
7. Plug unit into wall socket.
8. You are ready to CHOP/GRIND.
2
Motor Base
Spatula (not shown)
Cuisinart ® Smart
Power ™ Blade
Cover
3-cup
Work Bowl
With Handle