Flylink Full HD G-sensor GPS - Manual (Page 6)

- 6 -
‹
Camcorder Mode
1. Press REC button to start the video recording, and then press REC button to stop the
video recording. During the process, red icon will flash on the screen.
2. Select flashlight:
Choose the mode of flashlight in the status of video recording by pressing right key. The
sequencing will be forced flash , 、automatic flash 、 and no flash .
3. Digital zoom: Focus the camera on the subject; press the key Up and Down to make the
digital zoom.
‹
Revise the following content in the Menu mode:
Video recording quality: to choose the resolution of video recording: 1920x1080P30，
1440x1080P30，1280x720P30，848x480P60，848x480P30.
Circulating video recording: to set or shut the circulating video recording, in the status of
circulating video recording, when the capacity of TF card is full, the previous content shall
be covered automatically.
Automatic video recording upon start on: when connecting car charger, the device will
start the video recording automatically 3 seconds after start on.
Power on delay: When connection with car charger, select the car ignition, the delay start
time is the last set time.
Sound recording: select to open or close the microphone.
Language：set language.
TV out：NTSC/PAL.
Auto off：set idle time to power off the device.
Format：Format the TF card.
Stamp: Video recording/pictures whether add into the time and date, customer logo and
speed info.
Date：Use up or down key to change the digits and press OK to go to next item.
Operation