Cub Cadet 641 - Manual (Page 19)

19
SECTION 7: SPECIFICATIONS
Engine and Electrical
Make Kohler
HP 20 HP
Type 4-Cycle Gas
Cylinders 2
Valves Overhead
Displacement 38 cu. in. (624cc)
Maximum Torque 32.6 lb-ft @ 2600 rpm
Ignition Transistor Controlled
Lubrication Full Pressure
Oil Filter Replaceable (standard)
RPM, idle (no load) 1250 ± 50
RPM, fast (no load) 3950 ± 75
Cooling System Air
Air Cleaner Heavy Duty, Replaceable, Dual Element
Battery 30-amp/hr, 365 cold cranking amps
Alternator 12V-20amp Regulated
Headlights Two 37.5-watt Halogen
Wiring Automotive Style Fused Control System
Dimensions
Overall Length 110.4” (cm)
Overall Width 65.0” (cm)
Front-Tread Centers 50.0” (cm)
Rear-Tread Centers 52.0” (cm)
Overall Height 41” (cm)
Wheel Base 84.0” (cm)
Weight (including fuel/fluids) 1,552 lbs.
Ground Clearance
Under Transaxle
6.4” (cm)
Under Foot Platform 7.5”
Seating Capacity 2 persons
Seat Type High Back
Turn Clearance Circle 23.0 ft.
Towing Capacity 1,200 lb. (545.5 kg)
Payload Capacity* 1,400 lb. (636.4 kg)
*Includes 200 pound operator, 200 pound passenger, and maximum bed capacity
Fuel System
Capacity 5.7 U.S. gal.
Low Fuel Indicator Dash Indicator Light
Cargo Box
Material 14-Gauge Steel
Attachment Rubber Isolated
Capacity
Volume
13.3 cu. ft.
Weight 1,000 lb.
Steering Rack & Pinion w/ Ackerman-Type Geometry
Suspension 6 Wheel Fully Independent w/ Coil Over Shocks
Brakes Wet Disk in Transaxle
Parking Brake Foot Operated
Transmission
Type Continuously Variable (CVT)
Lubricant Shell TTF-SB Oil
Capacity 189 oz (5.5 liters)
Differential Lock Standard, Hand Operated
Drive Chain No. 60 Industrial Roller Chain
Ground Speed 0-19 mph
Transaxle Fully enclosed, Oil Bath
Gear Selection Forward, Neutral, Reverse
Rear Axle Housing Welded Steel