Cub Cadet 640 - Manual (Page 18)

18
SECTION 7: SPECIFICATIONS
Engine and Electrical
Make Honda
HP 20 HP
Type 4-Cycle Gas
Cylinders 2
Valves Overhead
Displacement 37.5 cu. in. (614cc)
Maximum Torque 32.5 lb-ft @ 2500 rpm
Ignition Transistor Controlled
Lubrication Full Pressure
Oil Filter Replaceable (standard)
RPM, idle (no load) 1400 ± 150
RPM, fast (no load) 3,850 - 4000
Cooling System Air
Air Cleaner Heavy Duty, Replaceable, Dual
Element
Battery 30-amp/hr, 365 cold cranking
amps
Alternator 12V-20amp Regulated
Headlights Two 37.5-watt Halogen
Wiring Automotive Style Fused Con-
trol System
Dimensions
Overall Length 110.4” (cm)
Overall Width 65.0” (cm)
Front-Tread Centers 50.0” (cm)
Rear-Tread Centers 52.0” (cm)
Overall Height 41” (cm)
Wheel Base 84.0” (cm)
Weight (including fuel/fluids) 1,552 lbs.
Ground Clearance
Under Transaxle
6.4” (cm)
Under Foot Platform 7.5”
Seating Capacity 2 persons
Seat Type High Back
Turn Clearance Circle 23.0 ft.
Towing Capacity 1,200 lb. (545.5 kg)
Payload Capacity* 1,400 lb. (636.4 kg)
*Includes 200 pound operator, 200 pound passenger, and
maximum bed capacity
Fuel System
Capacity 5.7 U.S. gal.
Fuel Gauge Located Under Seat
Low Fuel Indicator Dash Indicator Light
Cargo Box
Material 14-Gauge Steel
Attachment Rubber Isolated
Capacity
Volume
13.3 cu. ft.
Weight 1,000 lb.
Steering Rack & Pinion w/ Ackerman-
Type Geometry
Suspension 6 Wheel Fully Independent w/
Coil Over Shocks
Brakes Wet Disk in Transaxle
Parking Brake Foot Operated
Transmission
Type Continuously Variable (CVT)
Lubricant Shell TTF-SB Oil
Capacity 189 oz (5.5 liters)
Differential Lock Standard, Hand Operated
Drive Chain No. 60 Industrial Roller Chain
Ground Speed 0-19 mph
Transaxle Fully enclosed, Oil Bath
Gear Selection Forward, Neutral, Reverse
Rear Axle Housing Welded Steel