ClearOne comm Converge PA 4160 User Manual

Page 2

Audio Performance

Conditions: Unless otherwise specified, all measurements
are performed at 1 watt with a 1 kHz signal.

Line Inputs

Connectors: XLR Balanced
Frequency Response: 20 HZ - 20 kHz
Maximum Input Level: 15 dBu
Impedance: 10 KΩ

Outputs

Amplifier Output: 160-Watts/Channel into 8 Ω
Frequency Response: 20 HZ - 20 kHz
Channels: 4-Channel
Connectors: Binding Post or SpeakOn®
Impedance: 8 Ω
THD+N <.05% at 1 Watt
SMPTE IMD <.1% from 60 HZ to 7 kHz
Dynamic Range >100 dB
Damping Factor: 220
Crosstalk >65 dB

Protection Features

Thermal Shutdown
Current Limiting

Other

Bridgeable Outputs
Parallel or Stereo Impedance Switch
Clip, Presence, Fault Indicators
Front Panel Gain Controls
Front Panel On/Off Switch

CONVERGE

PA 4160

dATA SHEET

CONVERGE

PA 4160 BACK PANEL

SPECIFICATIONS

CLEARONE LOCATIONS

Headquarters:
Salt Lake City, UT USA

5225 Wiley Post Way
Suite 500
Salt Lake City, UT 84116
Tel: 801-975-7200
Toll Free: 800-945-7730
Fax: 801-977-0087
[email protected]

Latin America

Tel: 801-974-3621
[email protected]

EMEA

Tel: 44 (0) 1189 036 053
[email protected]

APAC

Tel: 801-303-3388
[email protected]

Other product names may be registered trademarks of their respective owners who do not necessarily endorse ClearOne or ClearOne’s products. All rights reserved. Information in this document subject to change without notice

Power

910-151-960 (US Version)
120 VAC; 60 Hz, 5.0 Amp max

910-151-961 (EU Version)
240 VAC; 50 Hz 2.5 Amp max

Operating Temperature

75 C° ambient unit temperature

Humidity

15 to 80%

dimensions (L x d x H)

18.89” x 18.58” x 3.46” (2 RU)
47.98 x 47.19 x 8.78 cm

Weight

40.8 lbs/18.5 kg unit weight

Compliance

FCC Part 15 Subpart B
EN 55103-1 55103-2
EN 60065
RoHS
WEEE

Part Number

910-151-960 Converge PA 4160 (US Version)
910-151-961 Converge PA 4160 (EU Version)

Asia-Pacific Support Center

Tel: 852-3590-4526
[email protected]