COP-USA CD55NV-HD22 User Manual

Page 22

= >

, @\+,-. /

etc.

Clear header: Clear preset header setting.

Return to the previous menu.

Ø AUTO SCAN: to enter the Auto Scanning submenu

Ø SCAN NO: to set the auto scanning number, maximum is 03.

Ø SPEED: to set the scanning speed for each patrol.

Ø SET START LIMIT: to set the start position of the scanning. After the user enter this item,

to use the joystick to move the dome camera and press “CLOSE” to save the current

position.

Ø SET END LIMIT: to set the end position of the scanning. After the user enter this item, to

use the joystick to move the dome camera and press “CLOSE” to save the current

position.

Ø RUN SCAN: to run the scanning function, Please set the start and end position first. And

if the start and end position are the same. The dome camera will

scanning for 360

To press “CLOSE” to exit.

Ø CLEAR SCAN: the clear the setting of the scanning, to press

“CLOSE” to exit.

Ø RETURN: to return to the MOTION SETUP menu.

Ø PATROLS: to enter the submenu to set the patrols.

Ø PATROL NO: to set the patrol number.

Ø EDIT PATROL: to set the parameter of the patrol, after enter this

item, the monitor is as following:

Both top and bottom lines display prompt and information of each patrol is displayed on

1.< PRESETS >
2.

AUTO SCAN

PATROLS

PATTERNS

SCHEDULE

MOTION SETUP

CLEAR

7. EDIT DOME LABEL

8. RETURN

1. PATROL NO :

001

2. EDIT PATROL
3. RUN PATROL

4. CLEAR PATROL

5. RETURN

PATROLS