COP-USA CF920 - Manual (Page 5)

Connecting cable
Connecting cable of face recognition camera:
The face recognition camera with plug and play cable,
which easy to be installed by end users.
Just connect the BNC wire and Power wire that similar the common
IR cameras, this intelligent camera needs about 3 seconds for initiali
-zation when power on, then change to normal monitoring display.
Picture 1 Power/BNC wire connection
Menu cable (RS485):
The function selection should be worked by a RS485 cable with terminal Block
when the camera is power on, the user can enter into the menu setting interface by
Calling the PRESET 95 from the PTZ Controller or from the DVR.
0LEASE