ChemoMetec NC-250 - Manual (Page 2)

How to get started
Dear NucleoCounter Customer!
Thank you for purchasing the NucleoCounter ® NC-250 ™ offering not only easy Viability and Cell
Count Assays, but also fast and easy assaying of cell cycle profiles with top class precision and
the fastest apoptosis assay!
1
The NucleoCounter ® NC-250 ™ Concept
Please read manual for detailed instructions
NucleoView ™ Software
Included on a USB stick
for an unlimited no. of instal-
lations.
NC-Slides A8 ™ and A2 ™
A8 slides for fast analysis and A2 slides for high
precision.
Unpack the NC-250 instrument and plug it in the main outlet. Do NOT connect the
USB cable to the PC.
Make sure that there are full administrator rights on the PC during the installation of
the NucleoView
™ NC-250 software.
Insert the USB stick in the PC and open the “Install_Guide” file for detailed installa-
tion instructions.
Open the “Install NucleoView NC-250 X.X.X.X.exe” file (the X’s indicate the version
number e.g. 1.0.22.0). Do NOT open the .bin file.
Follow the instructions on the screen. After the software installation it may be re-
quired to restart the PC.
Open the NucleoView ™ NC-250 software by double clicking on the NC-250 icon on
the desktop to start the installation of the instrument.
Connect the PC to the NC-250 instrument with the USB cable when the software tells
you to do so.
When the LED indicator light on the instrument turns green it is ready to use.
How to get started - 8 easy steps to install the NC-250 ™
Solution 18
For Viability and Cell Count
Assays.
 8 viability and cell counts in less than 3
minutes
- Total cell count
- Viability
- Cell diameter
- % of cells in clumps
 Up to 8 advanced analysis in one run
- Fast & Easy - High precision cell cycle analysis
- Cell health determinationvia the fastest
apoptosis assay
 Fast and easy operation
 Excellent reproducibility
 No calibration
 Maintenance and service free
 Flexible software package
 21 CFR Part 11 ready