How to use, How to adjust the pollution sensitivity – Coway AP-1503CHE User Manual

Page 18

HOW TO USE

How to adjust the pollution sensitivity

※ The unit is set at a standard sensitivity. In case that pollution degree is maintained

at the highest or the lowest level for over 2 hours after the unit starts to work,

please adjust the sensitivity of sensor as the following the way below.

Push both the ‘Auto/Manual’
and ‘Air Flow’ just over 2
seconds.

Step1

The “Pollution” light is out, and the
light stick of indication is on as in
the drawing.

Step2

You can adjust the sensitivity by
pushing ‘Auto/Manual’ button.

stage1:sensible
stage2,3:standard
stage4:insensible

Step3

You can confirm the sensitivity,
which you did, by pushing the ‘Air
Flow’ button.

Step4

�