Checkline LS-9-LED - Manual (Page 3)

– 3 –
2.0 Safety Information
The LS-9-LED must only be used in accordance with these operating instructions. The
LS-9-LED must not be altered in any way. The manufacturer will not be liable for any
damage resulting from incorrect or improper use. This will also render the guarantee
null and void.
WARNING!
• Under strobe lighting, moving objects appear stationary or in slow motion. The
objects should never be touched.
• The LS-9-LED must not be used in explosion hazard areas.
• Store the LS-9-LED in a dry place. It must not be exposed to water (dripping or
splashing). No objects illed with liquids (e.g. vases) should be placed on the unit
• Strobe lighting can trigger epileptic its in those who are susceptible.
CAUTION!
• Repairs should only be carried out by the manufacturer or supplier.
• The stroboscope’s electronic components contain environmentally harmful
substances. They must be disposed of in accordance with the relevant national
environmental guidelines.
– 10 –
General Parameters
Frequency range 0 to 120,000 FPM (lashes per minute)
Power supply 24 VDC (+/– 10%) / 20 W
DIN 415245-pin standard plug
Universal power supply unit available
External trigger input 3 to 30 V / max. 5 mA
potential-free optocoupler
DIN 41524 5-pin standard plug
U
out
= U
in
, max. 200 mA
Switchable trigger input trigger output
for parallel connection
Flash Parameters
Light intensity/sharpness Adjustable with turning knob
Light intensity single flash Approximately. 1 Mega-Lux / 12 " (30 cm)
Light intensity 7,500 Lux / 12 ” (30 cm)
Illumination area 12 x 20" (30 x 50 cm)
Flash color Ca. 5,000…8,300 K
Housing
Material Aluminium
Dimensions 8.8 x 5.1 x 4.4" (224 x 130 x 112mm)
Weight 2.76 lbs. (1250 g)
Ambient Conditions
Ambient temperature 32 to 114 °F (0 to 40 °C)
Storage temperature –10 to 125°F (–25 to 70 °C)
Humidity maximum 95% not condensing
Certifications Certiicate of CE conformity
7.0 Technical Data