Buzz Audio tonic 3 band equaliser - Manual (Page 5)

- 8 -
5] Specifications
Maximum Input Level
+23dBu
Maximum Output Level +26dBu into 3k ohm load.
Frequency Response EQ set flat
17Hz to 175kHz (+1dB, -3dB).
Harmonic Distortion
Measured +10dBu output level
0.08% @ 100Hz, 0.02% @ 1kHz, 0.005% @ 10kHz
Signal to Noise Ratio
-88dB A wtg, input shorted.
Input Impedance
20k ohms approx balanced
Indicators
Single LED overload indicator at +20dBu.
Size
(1.5”Wx5.25”H). Fits 1 slot in API™ 500VPR Series rack
Power requirements
= 120mA +/- 15-18 volts DC as
supplied by rack power supply.
Specifications are typical of a production unit and are subject to
change without notice because we might be able to make it slightly
better. 0dBu reference = 0.775 volts RMS.
- 9 -
6] Warranty and Service
We are confident that you will receive many years of
trouble free operation from your unit. If however you
experience any technical problem with your Tonic
equalizer, contact your dealer or Buzz Audio for
recommendations on what to do.
For on line support visit our web site;
www.buzzaudio.com and click on Users Area
Buzz Audio, 42b Hania St, PO Box 6677, Te Aro,
Wellington, New Zealand.
Voice/Fax 64+4+385-2478.
Email; [email protected]
•Disclaimer
Buzz Audio is not liable for any damage to
microphones, amplifiers, consoles, speakers or any
other equipment and/or electric shock to humans that is
caused by negligence or improper installation and/or
use of the Tonic Equaliser module.
•Standard Product Warranty
Buzz Audio guarantees the Tonic to be free of defective
materials and/or workmanship for a period of 1 year (12
months) from the date of sale, and will replace