Buzz Audio elixir mic preamplifier - Manual (Page 5)

- 8 -
5] Specifications
Min Gain Mic = +22dB (-2dB with pad in)
Max Gain Mic = +70dB
Min Gain Instrument = +12dB (-3dB with pad in)
Max Gain Instrument = +60dB
Maximum Output Level = +34dBu into 3k ohm load.
Frequency Response
Mic
= 10Hz to 300kHz @ 20dB gain (-3dB).
Instrument = 10Hz to 120kHz @ 20dB gain (-3dB).
Total Harmonic Distortion
(measured at -20dBu input, gain adjusted for +10dBu output level)
Mic
= 0.15% @ 100Hz, 0.01% @ 1kHz, 0.005% @ 10kHz
Instrument = 0.15% @ 100Hz, 0.015% @ 1kHz, 0.015% @10kHz
Noise
EIN Mic
= -132.5dB A wtg, 150ohm source Z.
Signal to Noise Ratio Mic = -74dB A wtg, input shorted.
Signal to Noise Ratio Instrument = -76dB A wtg, input shorted.
CMNR Mic
= -78dB @ 100Hz, -100dB @ 1kHz, -100dB @ 10kHz.
Input Impedance Mic = 4k ohms/1k2 ohms switchable.
Input Impedance Instrument = 1MEG ohms/20k ohms switchable.
Size
= (1.5”Wx5.25”H). Fits 1 space in API™ 500VPR Series rack format
Power requirements = 150mA +/- 15-18 volts DC, and +48 volts
DC phantom power, as supplied by rack power supply.
Specifications are typical of a production unit and are subject to
change without notice because we might be able to make it slightly
better. 0dBu reference = 0.775 volts RMS.
- 9 -
6] Warranty and Service
We are confident that you will receive many years of
trouble free operation from your unit. If however you
experience any technical problem with your Elixir,
contact your dealer or Buzz Audio for recommendations
on what to do.
For on line support visit our web site;
www.buzzaudio.com and click on Users Area
Buzz Audio, 42b Hania St, PO Box 6677, Te Aro,
Wellington, New Zealand.
Voice/Fax 64+4+385-2478.
Email; [email protected]
•Disclaimer
Buzz Audio is not liable for any damage to
microphones, amplifiers, consoles, speakers or any
other equipment and/or electric shock to humans that is
caused by negligence or improper installation and/or
use of the Elixir preamplifier module.
•Standard Product Warranty
Buzz Audio guarantees the Elixir to be free of defective
materials and/or workmanship for a period of 1 year (12
months) from the date of sale, and will replace