Buzz Audio dbc-20diode bridge compressor - Manual (Page 6)

⑥
5] Specifications
Maximum Input Level = +27dBu
Maximum Output Level = +27dBu
Frequency Response = 6Hz to 400kHz
Noise = -80dBu A weighted (measured with 10dB make up gain applied)
Harmonic Distortion at +10dBu input level and no gain reduction =
0.28%@100Hz, 0.25%@1kHz, 0.15%@10kHz
Harmonic Distortion with 10dB gain reduction (release 400mS)
1.5%@100Hz, 0.5%@1kHz, 0.5%@10kHz
Gain variable from 0 to +15dB
Dimensions = 1U rack mount case (482W x 44H x 250D)
Weight = 2.9kg
Mains voltage = 110 to 240Vac selectable
6] Service Information
We are confident that you will receive many years of trouble free operation from
your unit. If however you experience any technical problem with your DBC-20,
contact your dealer or Buzz Audio for recommendations on what to do.
The DBC is constructed with non-surface mount serviceable parts, this means
most electronic faults can be easily repaired. Pots and switches do eventually
wear out but you should receive many years of use before replacement might
be necessary.
Please note there are no user serviceable parts inside the DBC-20 and
attempting any internal adjustments without the alignment instructions and
correct test equipment is not recommended.
For on line support visit our web site www.buzzaudio.com
Buzz Audio Ltd, PO Box 6677, Wellington 6141, New Zealand.
Phone +64-(0)4-472-3084. Email; [email protected]