Buzz Audio req-2.2resonance equaliser - Manual (Page 7)

7
CUT/BOOST CUT/BOOST CUT/BOOST CUT/BOOST – adjusts the amount of eq applied to the signal. The above
drawing shows the standard version with +/-16dB range. The mastering
version of the REQ has a stepped +/-8dB range.
ON
ON ON ON – when this switch is illuminated, the associated eq band is engaged
into the signal path. When switched off, the eq band is completely
removed from the signal path.
PEAK
PEAK PEAK PEAK – this red LED will illuminate when levels within the REQ circuitry
approach +22dBu warning of possible internal overload. Levels are
monitored at critical points throughout the REQ signal path.
Master Section Controls Master Section Controls Master Section Controls Master Section Controls
H
H H HIGH PASS FILTER IGH PASS FILTER IGH PASS FILTER IGH PASS FILTER – a 6 position switch to select roll off frequency of the high
pass filter (HPF). The associated ON ON ON ON switches engages the filter when
illuminated. The drawing above shows the HPF frequency choices for the