ClearSounds CS-WS1 - Manual (Page 5)

How To Set The Time
1. Press and hold the Time button.
2. Holding down the Time button, press the hour button, then the
minute button until the correct hour appears.
3. Release the Time button.
NOTE: There is a PM indicator on the top left of the display.
How To Set The Alarm Time
1. Press and hold the Alarm button.
2. Holding down the Alarm button, press the Hour button, then Minute
button until the exact time you want appears.
3. Release the Alarm button.
How To Set The Alarm Mode
Your Wake & Shake provides several alarm options. These
options are the same for both the clock alarm and the phone ring
signaler.
Using the Alarm Mode Switch, you may choose from the fol-
lowing:
V: Shaker Only
V+S: Shaker & Audible Alarm
S+F: Audible Alarm & Strobe Light
F+V: Strobe Light & Shaker
V = Shaker (Vibration)
S = Sound (Audible Alarm)
F = (Strobe Light)
CS-WS1manual.pm 2/5/04, 20:07 5