AYRE MX-R - Manual (Page 9)

Standby
A short press on the standby button of a linked component will
turn that individual component off. A longer press (more than
two seconds) will turn off all linked components.
A long button press provides a simple way to turn the entire
system off from any linked component.
Display Brightness
Changing the brightness level on the display of any linked
component will cause a matching change in all linked
components, including the status LED of the MX-R amplifier.
There is no directly accessible brightness control for the status
LED on the MX-R. However if there are no other linked
components available to adjust the brightness, a special
configuration mode allows the desired brightness level to be
selected. Please refer to the chapter “Customization and
Configuration”.
Break-In
100 to 500 hours of music played through
the system will ensure full break-in.
Due to the manufacturing processes used for the printed circuit
boards, wires, and capacitors, a break-in period is necessary for
the amplifier to reach its full performance potential.
9