CLIFFORD 980074 SERIES 11CX - Manual (Page 11)

6
© 2004 Directed Electronics, Inc.
Using Your System
The transmitter buttons indicated in this manual correspond to a
standard configuration transmitter, unless otherwise specified.
You can arm the security system by pressing for one second.
When the system arms, you will hear a short siren sound (chirp)
and the parking lights (optional) will flash once. If the power door
locks are controlled by the system, the doors will also lock. Once
armed, the LED system status indicator will flash once per second
to indicate that the system is actively protecting your vehicle. If
you hear a second chirp after arming and notice that the LED sys-
tem status indicator is flashing in a grouped pattern, this signals
Bypass Notification. Bypass Notification is described in detail in
the Diagnostics section of this manual.
Your security system can also be programmed for Passive Arming.
With Passive Arming, the system automatically arms itself 30 sec-
onds after the ignition has been turned off and the last door has
been closed. During the 30-second Passive Arming countdown, the
LED system status indicator will flash twice as fast as it does when
the system is armed. If the system is programmed for Passive
Arming, care must be taken to prevent the keys from being locked
in the vehicle.
Arming