AquaFX The AquaFX Mako RO/DI - Manual (Page 4)

Temperature Compensation Table
The Series 1 curve demonstrates the effect temperature has on the
permeate flow of a 50 Gallon per Day (GPD) membrane .
The above curve was generated by varying the water temperature. 50 GPD is produced
at approximately using 72 degrees F (at a constant pressure of 50 PSIG, and constant
TDS of 125PPM)
The three major variables that control permeate are temperature, pressure and
incoming water quality. We can control these to some extent; please do not
hesitate to call us for assistance
Temperature in Degrees F
Gallons
p
er
Day