Alyseum MS-SW5 - Manual (Page 6)

MS-SW5 – User’s manual © - Revision 1.1
Page 6
5 Miscellaneous
5.1 Disclaimer
All rights reserved.
Reproduction in whole or part of this document is prohibited without the express permission of
Alyseum
.
© 2011-2015 Alyseum
The information and specifications described in this manual are subject to change without prior
notice
Throughout this manual, trademarked names might be used. We state herein that we are using the
name to the benefit of the trademark owner, with no intention of infringement.
5.2 Maintenance
Switch Off the power before maintenance.
Do not attempt to clean the unit with chemical solvents (thinner, benzene or alcohol) as this might
damage the finish. Use only a clean, dry cloth.
5.3 Static Electricity, ESD
Electrostatic discharge (ESD) can cause malfunction and/or damage to electronic devices if
discharged into the device.
Despite Alyseum products having built-in protections against ESD, voltages might build up at
levels that could harm your equipment.
5.3.1 Some tips and precautions for ESD sensitive environment
● Make sure to discharge any built-up static electricity from yourself and your devices before
touching or connecting one device to another
● Ground yourself by touching an earth grounded metal surface before handling your device
and other equipments.
● For fixed installations, put the device in a grounded metallic rack.
● Ensure air relative humidity is minimum 60%.
● Install ESD specific prevention items, such as grounding mats.
● Reduce movement speed in handling or (dis)connecting devices
● Avoid carpet or other synthetic flooring.
5.3.2 Standard symbols for ESD advertising