beautypg.com

Save these instructions, Unpacking – Harbor Freight Tools 47618 User Manual

Page 3

background image

SKU 47618

For technical questions, please call 1-800-444-3353.

Page 3

Always wear ANSI-approved safety

8.

goggles during use.
Do not cover the vents of the Fast

9.

Battery Charger, place on a hard

surface.
Keep this Fast Battery Charger out of

10.

the reach of children.
Unplug the Charger from outlet when

11.

not in use.
Do not operate this Fast Battery Char-

12.

ger with a damaged co

rd or plug or

after any malfunctions. Do not use if

it has

been damaged in any manner.

Do not use outdoors.

13.

Do not use this Fast Battery Charger

14.

for other than intended use.
Maintain labels and nameplates.

15.

These carry important information. If

unreadable or missing, contact Harbor

Freight Tools for a replacement.
The warnings, precautions, and

16.

instructions discussed in this instruc-

tion manual cannot cover all possible

conditions and situations that may

occur. It must be understood by the

operator that common sense and cau-

tion are factors which cannot be built

into this product, but must be supplied

by the operator.

save tHese

instrUCtiOns.

power Cord safety

A short power supply cord is to be

1.

provided to reduce risks resulting from

becoming entangled in or tripping

over a longer cord.
Longer extension cords are available

2.

and may be used if care is exercised

in their use. Follow all directions when

using a long extension cord.
If a long extension cord is used,

3.

the marked electrical rating of the

a.

(detachable power supply cord or)

extension cord should be at least

as great as the electrical rating of

the appliance,
if the appliance is of the grounded

b.

type, the extension cord should be

a grounding type 3-wire cord, and
the longer cord should be arranged

c.

so that it will not drape over the

counter top or tabletop where it can

be pulled on by children or tripped

over.

UnpaCKing

When unpacking, check to make

sure that the item is intact and undam-

aged. If any problem exists, please call

Harbor Freight Tools at the number shown

on the cover of this manual as soon as

possible.

REV 09e