Clarion DPX2250 - Manual (Page 25)

APX/DPX Amplifiers 25
English
DPX Amplifiers
Parameter DPX11500 DPX1800 DPX2250
Maximum power output 1900W 1000W 150W x 2
Continuous rated power 430W x1 (11Hz-220Hz) 430W x1 (11Hz-220Hz) 125Wx2
Typical power in bridged mode Not bridgeable; Not bridgeable; 400W
stackable with second stackable with second
DPX11500 DPX1800
Typical power in 2-Ohm load 1500W 800W 200W x 2
Typical power in 1-Ohm load 1500W 700W N/A
S/N (A-weighted) >100dB ≥ 79dB 80dB
Floor noise 1mV 1mV 1.5mV
Channel separation Mono Mono 70dB
Frequency response ( ±1.0dB) 16 to 150Hz 16 to 150Hz 18 to 30 kHz
Line level input sensitivity 0.2 to 8V with IVS 0.2 to 8V with IVS 0.2 to 8V with IVS
Input impedance 22K Ohms 22K Ohms 22K Ohms
Allowable battery voltage 10 to 16 Volts 10 to 16 Volts 10 to 16 Volts
Size 21 1/4”x12”x2 7/8” 19 1/4”x12”x2 7/8” 13 1/4”x12”x2 7/8”
These specifications are Amplifier Power Standard CEA-2006 Compliant.
APX-DPXOwnersManual.pmd 2006-03-14, 21:47 25