Uncaged Ergonomics WorkEZ Standing Desk - Manual (Page 2)

Monitor Stand: Setup Instructions:
Keyboard Tray: Setup Instructions:
Mouse Pad: Setup Instructions:
Instructions:
1. Hold the Female Clamp against the inside of WorkEZ’s leg.
2. Hold the Male Clamp against the outside of WorkEZ’s leg.
3. Align the grooves that latch the Male Clamp and Female Clamp together.
4. Squeeze the Male Clamp and Female Clamp together with 1 hand while
5. Insert the screw from the inside and screw it into the panel
6. Tighten the screw and ensure the panel is stable.
Check www.UncagedErgonomics.com for a “How-To” video!
1. Screw
2. Female
Clamp
3. Male
Clamp
1. Screw
2. Female
Clamp
4. Panel
3. Male
Clamp
4. Panel
Curved for
your wrist.
3 holes - choose the one
that is most comfortable.
3 C
omponen
ts:
Monitor
Stand
Repeat for leg 2.
Adjust further if
needed.
USE Joint A Joint C
Joint B
C: -75
º
B: -120
º A:-60
º
Simultaneously pressing the same joint on each leg lets
you quickly and evenly adjust the platform angle or height.
Push both
buttons
Keyboard
Tray
Repeat for leg 2.
Adjust further if
needed.
USE
Joint A Joint C
Joint B
C: 60
º
B: 45
º A: 0
º