STIEBEL ELTRON ULTRONIC 2 W User Manual
Page 8
8
| ULTRONIC
™
1 / ULTRONIC
™
2 TOUCHLESS AUTOMATIC HAND DRYERS
WWW.STIEBEL-ELTRON-USA.COM
INSTALLATION
ELECTRICAL CONNECTIONS
8. Electrical
connections
26
_0
7_
32
_0
0
45
1
1 Wiring
block
Install a 1/2˝ electrical connector in the back part of
housing in the hole located below the wiring block
(1, above).
Feed wires through connector; tighten clamp down
on wire.
The “live” wires must be connected to the slots
on the terminal marked N/L and L. The ground
wire must be connected to the slot on the terminal
marked with the ground symbol.
85
_0
7_
32
_0
0
02
Put the housing back onto the front of the unit.
Lift upward to reengage the hooks into the
attachment eyelets.
Press the housing down gently so it locks in place.
1.
2.
3.
26
_0
7_
32
_0
0
42
Turn the two screws a full turn counterclockwise to
stop.
26
_0
7_
32
_0
0
43