STIEBEL ELTRON ASPHALT ROOF FLASHING KIT - 560105 - Manual

17 West St., W. Hatfi eld, MA 01088
| 800.582.8423 | 413.247.3380 | fax 413.247.3369 | [email protected] | www.stiebel-eltron-usa.com
Simply the Best
INSTALLATION INSTRUCTIONS
ASPHALT ROOF FLASHING KIT - 560105
Installing a Flashing Kit
!
CAUTION: READ ALL INSTRUCTIONS BEFORE
INSTALLING KIT. ADDITIONAL ITEMS WILL BE
NEEDED. THIS INCLUDES A TAPE MEASURE, RATCHET,
MARKER, CHALK SNAP LINE, AND A POWER DRILL.
1. Unpack all of the boxed components and familiarize
yourself with the individual parts.
2. Locate the rafters and snap horizontal and vertical lines
to mark the installation position of the fl ashing.
3. Install base piece and screws as shown in the image
below.
Note: Make sure to drill the mounting screws into the roof
rafter. This is a key element in the durability of the racking
system.
4. Insert the fl ashing so the top part is under the next
row of shingles and pushed far enough up slope to prevent
water infi ltration through the vertical joint in the shingles.