Panasonic MC-V5715 - Manual (Page 6)

TO ASSEMBLE CLEANER
A
WARNiNG
Electrical Shock Hazarti.
DO NOT plug Into electrical supply until assembly Is complete. Failure to do so could
result In electrical shock or injury.
ni^6H№m0fEi10iA^^
The vacuum cleaner main body and handle are packed separately.
1. The handle screw has
been installed for shipping
purposes. Please remove
the screw before inserting
the handle. Insert the
handle as shown in the
Illustration.
Handle
2. Insert the screw
that you have
removed. Be sure
the screw is tight­
ened, but not over-
tightened.
3. There is a recessed area
between the upper cord hook base
and the handle that is designed
to secure the power cord dur- po,rer
ing vacuuming.
cord -
Always push the power cord down
into this recessed area to help
keep the power cord from hang­
ing near the nozzle and being
damaged by the agitator.
4. Loosely wrap the power cord
around the quick release cord
hook and the lower
cord retainer. Secure Ratalner
the plug head to the (Plug Head)
cord by pushing the
power cord into the retainer
on the plug head.
;
USINGTHE CORD HOOK
1. The upper cord hook has a ^
quick-release action. To
release the power cord, rotate 1
the hook downward and the j^t—cord
complete power cord will jmt&^Hook
drop off the hook for immedi- m
ate use.
2. DO NOT unplug the
Ml
power cord by pulling on /
the cord. Grasp the plug
head and pull to unplug the
|V[jM
vacuum cleaner. j
Return the hook to the 'am
upright position before //7-J
attempting to rewind the //
1
cord. I j
- 6 -