Panasonic F-P15HU2 - Manual (Page 6)

To operate the unit
Control panel section
Auto
Speed
Low Med Hi Super
? ? ? ? f
Speed lamp Auto lamp
Filter Check / Reset
HEPA Deodorize
0- © 0- ©
Power/Speed
Operation Switch
Power/Speed switch
This switch is a six position switch.
Each time this switch is pressed, the operation mode
changes without stopping from Low to Med to Hi to
Super, to automatic operation, to Monitor position.(On
any operation mode other than Monitor position, the
operation indicator lamp comes on to tell you which
operation mode you've selected.)
For Manual operation
Manually select the air speed (Low, Med, Hi, or
Super) as desired.
For Automatic operation
In "Auto" mode, the unit will detect the condijion of
the air passing through the micro dust sensor then
automatically select the fan speed(Low, Med, Hi).
(The AUTO lamp and the Air Speed lamp come on.)
Note
Speed
Low Med
0
—
0
-
t_______
Hi
o
Super
- o -
Auto
o
------------- (Monitor)-----------------'
(This display shows that the unit is in AUTO mode
and the air speed is "Hi.")
Speed
Low Med
o o
Hi
o
Super
O
Auto
o
(Monitor)
(Only the selected Speed lamp comes on.)
Speed
Low Med Hi
O O O
Super
O
Auto
o
(Only the selected Speed lamp comes on.)
(This display shows that the mode is in AUTO
and the air speed is "Hi.")
• When in the AUTO mode, the air speed setting "Super" is not used.
Note
Do not use in place of a fan or kitchen range hood. If you do, the filter life may be considerably diminished or the
product may suffer damage.