CTX PV520 User Manual
Page 24
PV520 User’s Manual
24
Image has
horizontal
flickering lines
Use "Phase" to make an adjustment.
IF input signals are 720x350 and 640x400, into OSD
Control Text/ Graphics item switch to other mode.
Signal out of
Range
When the input signal is outside the normal specifications
the screen will display an "Unsupported Mode "
message.
No Signal Input
The "No Signal Input" message indicates that the cable
may not be plugged property into the host system.
WARNING:
Do not disassemble the monitor. Contact your dealer if needed.