Panasonic RAMSA WU-SX01A - Manual (Page 2)

To Users of the WR-SX1 Series
This module is for the WR-SXIA series. If you are a WR-SX1 series user, be sure to read the following instructions
before installing the module.
• If you do not know which series, SX1 or SX1 A, you are using, it is shown on the front cover of the operating instruc­
tions or on the nameplate on the rear panel of the device. It can also be checked by model number.
SX1 series: Model WR-SX1/“ (** indicates the number of channels)
SX1A series: Model WR-SX1 A/** {** indicates the number of channels)
[LEVEL MATCH LED colors have been changed.]
• Starting with the SX1A series, the LEVEL MATCH LED lights in two colors.
It lights green, as on the preceding models, when the fader position matches the fader value saved in the memory,
but ft lights red when the fader position exceeds the memory value.
• The LEVEL MATCH LED can be modified to light in green only as on the preceding models if you wish to match it
with the functions of the other modules installed in the device. The method of its modification is as follows:
[Method]
• Remove the R102 shown below by disconnecting it or cutting the lead at the root.
T7-------------- ST
Panasonic
Broadcast & Television Systems Company
Division of Matsushita Electric Corporation of America
RAMSA/Professional Audio Systems
3330 Cahuenga Blvd. W«l, Los Angeles. CA 90068 1-800-777-1146
PANASONIC CANADA INC.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905) 624-5010
NM0699-0 YWA8QA5207AN Printed in USA