Panasonic KX-T7450 - Manual (Page 5)

AUTO ANSWEf?
□-------
MUTE
VOICE CALL
n—I
MUTE
AUTO ANSWER
Used to answer an intercom call
automatically.
VOICE CALL (KX-T7450 only)
Used to monitor an intercom call
automatically.
MUTE
Used to listen to the other party
without them hearing you. You can
mute the handset microphone or the
microphone.
.uroo.. AUTO DIAiySTORE
n I Used for speed dialing in the system or
INTERCOM
Used to make or receive intercom calls.
^_^Jog Dial
Y 0 to search the stored telephone
V j numbers or system features and adjust
^ the volume or the display contrast.
MESSAGE
STORE
MESSAGE
j Used to leave a notification or call back
the party who left the notification.
PAUSE
^ Used to insert a pause in speed dial
numbers or in other numbers.
storing program changes.
CONF
Used to make a three-party conference. CONF
PROGRAM
PfloflffJ Used to enter and exit the programming
mode.
FLASH
Used to disconnect the current call and
make another call with holding the
same outside line.
Flexible Outside (CO) Line Button
j Used to make or receive an outside
REDIAL
REDIAL
——1 Used to redial.
d
call, or access a feature if the button is
assigned as a One-touch dialing button.
Function Button
Used to perform the displayed function
or operation.
FWD/DND
1 Used to perform Call Forwarding or
Do Not Disturb.
SHIFT
Used to alternate the sub function on
the display.
Soft Button
Used to perform the function or
SP-PHONE
cr MONITOR
FV/D/DND CEZD
HOLD
HOLD
■J Used to place a call on hold.
TRANSFER
operation that appears on the bottom
line of the display.
SP-PHONE
Used for the handsfree operation.
MONITOR (KX-T7450 only)
Used for the handsfree dialing.
You can monitor the party’s voice
handsfree.
TRANSFER
Used to transfer a call to another party.
For KX-T7433 and KX-T7436 Users
The display can be adjusted.
1 Press the LCD ADJ button.
2 Lift or put down the display.
Display
LCD ADJ
button
J
f ;