Powering off the projector – Compaq MP1600 User Manual
Page 23
MP1600 Microportable Projector 1-17
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM
Part Number:383706-001 File name: BkCh1.doc
Powering Off the Projector
1. Press the Standby button to turn off the projector lamp.
The message “Going to Standby” displays and the LED on the
Standby button blinks amber.
IMPORTANT: Allow the projector to cool down for about
five to ten minutes before turning it off.
2. Turn off the Main power switch on the back of the projector.
3. Disconnect the power cord from the electrical outlet and the
projector.
CAUTION:
If the LEDs on all five buttons rapidly flash
amber, this indicates that the lamp has overheated and the
projector has automatically shut down. Remove any
obstruction that may prevent proper ventilation to the
projector, and wait five to ten minutes to allow the projector
to cool down before powering it on again.