Chicago Electric 90236 - Manual (Page 2)

SKU 90236 For technical questions, please call 1-800-444-3353. Page 2
Item Description
Electrical Requirements 5400 Watt Surge Power
4600 Watts Max. Output / Continuous Running Output 4000 Watts
20 AMPs @ 120V / 15 AMPs @ 240V
60 Hz Output
120V Dual Outlet: 20 AMP, 3 Prong Grounded
120/240V Outlet: 20 AMP, 4 Prong Twistlock
Overload Protection: Two 15 AMP Circuit Breakers
Engine Type 9 HP Robin ® /Subaru ® EX Series with Recoil Start
4 Cycle / 265 CC Engine Displacement
Model #EX-27052020
Alternator Two Pole / Single Phase / 60 Hz
Fuel Tank 6.5 Gallon
Estimated Run Time 14.5 Hours Per Full Tank @ 1/2 Load
Overall Dimensions 29-3/4” x 25-1/2” x 20-5/8”
Weight 155 Pounds
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, operating,
inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the
inside of the front cover. Keep this manual and invoice in a safe and dry place for
future reference.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 17
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
THIS
GENERATOR IS NOT
INTENDED TO POWER
SENSITIVE ELECTRONIC
EQUIPMENT WITHOUT
THE ADDITION OF AN
APPROPRIATE LINE
CONDITIONER (SOLD
SEPARATELY).
REV 12/03; 02/04; 05/04
This product requires oil and fuel to be added before starting.
Attempting to start the engine without oil WILL ruin the engine and
void the warranty.
Fill the engine with the following:
1.15 qt. of SAE 15W/40 oil
6.5 Gal. of unleaded gasoline with no oil added
Before starting the engine, refer to the engine owner’s manual for additional engine
maintenance information.
Call Harbor Freight Tools at 1-800-444-3353
for all technical questions and all inquires
regarding GENERATOR AND ENGINE
replacement parts.