I8.3h, Manual operatic, P 50 – Panasonic THE GENIUS PREMIER NN-S569 User Manual
Page 10: I^lisk, Usci»ygur?^m6ate
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

toi.
USCi»YGUR?^M6Ate'
1. Plug into a properly grounded electrical outlet.
Display Window
The oven automatically displays
weights in imperial (o£^lb).
2. If you wish to use metric (g/kg):
88.88
*y»
V
i
,
Start
Press Start to convert to metric.
Verify your selection in the
Display Window.
3.
/
----------->
Skyj/
Dot appears in
Reset
V_______ J
Display Window.
•
Press.
Now enjoy cooking with your Panasonic microwave.
i^liSk
ii
This feature allows you to display the time of day.
The oven will operate without setting the clock.
Example: To set 12:34
am
or
pm
.
Display Window
1
.
2
.
3.
^
Clock
j
Press.
Dot flashes.
Enter time of day
using number pads.
Dot continues
flashing.
Clock
I 8 . 3 H
Press
Clock again
to set time of day.
Dot stops flashing.
NOTES:
1. To reset the clock, repeat step 1 through 3.
2. The Clock will retain the time of day as long as electricity
is supplied.
3. Clock is a 12 hour display.
4. Oven will not operate while dot is flashing.
■ Manual Operatic^
This feature allows you to manually set the power and time
for microwave cooking.
Press
Power Level
pad until desired power appears in the
Display Window.
See Chart below.
Example: To cook at P 50 (MEDIUM) Power for 1 minute
30 seconds.
Display
Wrndow
1
.
Level
P 5 0
Press four times.
2.
3. r
start
Enter cooking time
using number pads.
Display Window
counts down.
1 . 3 0
1 . 8 3
Press.
4. At the end of cooking,
five beeps sound and
or
1 8 . 3 3
Dot
Time of day
appears.
Press
Power Level
Power Level
% Power
once
PI 00
(HIGH)
100
%
twice
dEF
(DEFROST)
30%
3 times
P 70
(MEDIUM-HIGH)
70%
4 times
P 50
(MEDIUM)
50%
5 times
P 30
(MEDIUM-LOW)
30%
6
times
P 10
(LOW)
10
%
NOTES:
1. For more than one stage cooking, repeat steps 1 & 2 for
each stage of cooking before pressing Sfarf pad.
Maximum number of stages for cooking is 3 stages.
2. When selecting P100 (H|GH) power for the first stage,
you may begin at step
2
.
3. Two beeps will sound between each stage of
programming. Five beeps will sound at the end of the
entire sequence.
4. When selecting PI 00 (HIGH) power, the maximum time
recommended is 99 minutes 99 seconds,
5. For reheating, use PI 00 (HIGH) for liquids, P 70
(MEDIUM-HIGH) for most foods and P 50 (MEDIUM) for
dense foods.
- 8 -