Panasonic NI-C55SR - Manual (Page 6)

HOW TO CARE FOR YOUR IRON FABRIC IRONING CHART
AFTER EACH USE
1. Turn the iron off and unplug.
2. Empty the iron immediately after using.
Do not store the iron with water in it.
3. Move the Steam/Dry Selector into the Dry position.
If the Steam/Dry Selector is not in the Dry position
after using, remaining water will move into the Soleplate and damage the Soleplate and
may result in burns during the next initial use of the iron.
4. Wait until the iron has cooled before storing it, and always set it on the Heel Rest to protect
the Soleplate from scratches, corrosion or stains.
5. After letting iron cool completely, push the Cord Wind Button to wind the cord. Store the iron
vertically in a safe place after winding cord completely.
Please see Important Safety Instructions on pages, items 4 and 5.
OUTSIDE SURFACE OF IRON
After unplugging and cooling the iron, simply wipe off with a damp cloth and if necessary,
use a mild detergent.
NEVER USE ANY HARSH CLEANERS.
SOLEPLATE
Starch and other residue may be easily removed from the Soleplate with a damp cloth.
To avoid scratching the finish never use a metallic pad to clean the Soleplate, and never
place the iron on a rough surface.
If synthetics are ironed at too high a temperature, not only is the fabric usually ruined, but
the iron Soleplate is often covered with the melted remains of the synthetic fabric.
The best way to remove synthetic residue from the Soleplate is to heat the iron and to iron
over an old cotton rag.
A CAUTION
Never use steam iron cleaners in the iron, since they may damage the working parts of
the iron.
SPECIFICATIONS
NI-C55SR NI-C75TR NI-C76SR NI-C77XR NI-C78SR
Power Source 120V, 60Hz
Power Consumption 1 0 A , 1200W
Net Weight 3.1 lb (1.4kg)
NOTES: 1. Check fabric for specific ironing instructions, always follow manufacturer's
instructions.
2. Iron blended fabrics at setting for lower-temperature fiber or for the
highest-percentage fiber.
3. Use caution, some synthetics may melt at high temperature.
Temperature
Selector Setting
Fabric Ironing Recommendations
1
ACRYLIC
* ACRILAN
* CRESLAN
* ORLON
ACETATE
METALLICS
SUEDE
Dry iron on wrong side, or use a press cloth on
top of fabric. Don't sprinkle water directly on
fabric to avoid spots.
To iron suede, cover ironing board with brown
paper and use it as a press cloth.
2
NYLON
* ANTORON
* CAPROLAN
SILK
Dry iron on wrong side.
3
PERM.PRESS
RAYONS
POLYESTER
* DACRON
* FORTREL
* KODEL
TRIACETATE
* ARNEL
W'n W COTTON
Dry iron on wrong side. To touch-up collars,
cuffs, pockets, etc., iron lightly on right side.
4
WOOL
VELVET
Steam ironing is suggested. Never iron completely dry.
To iron velvet, steam iron holding the slightly above the
fabric
5
COTTON
Steam ironing is suggested. Sprinkle water on the fabric,
depending on its thickness. Iron dark fabric on wrong
side to avoid unwanted sheen.
6
LINEN
Steam ironing is suggested. Iron dark fabrics on wrong
side to avoid unwanted sheen.
' Trademarks of Fiber Manufacturers.
Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation of North America
One Panasonic Way Secaucus
New Jersey 07094
http://www.panasonic.com/contactinfo
Panasonic Puerto Rico, Inc.
Ave.65 de Infanteria. Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
http://www.panasonic.com/consumersupport
-11-
© 2005 Matsushita Electric Industrial Co., Ltd. All rights reserved.
Printed in China
-12-