Clock setting, Power & time setting – Panasonic MICROWACE OVEN NN-S560 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Clock Setting
You can use the oven without setting the clock.
Example: To set 11:25 a.m. or p.m.
1.
Clock
* Press once.
►Colon will blink.
2.
□
□00
• Enter time of day using
the number pads.
►Time appears on the
Display Window;
colon IS blinking.
3.
Cfocic
• Press.
►Colon stops blinking:
time of day is entered
and locked onto the
Display Window.
NOTES:
1.
To reset time of day, repeat steps 1- 3.
2,
The clock will keep the time of day as long as
oven is plugged in and electricity is supplied.
S.CIock is a 12 hour display.
4.0ven will not operate while colon is blinking.
To Use Popcorn Pad
Example: To heat 1.75 oz. of Popcorn
1.
Popcorn
Press once
• Set the desired weight
of prepackaged
microwave popcorn.
Press
Weight
once
twice
3 times
4 times
5 times
1.75 oz. (50g)
2.65 oz. (75g)
2.85 oz. (80g)
3.0 oz. (90g)
3.5 oz. (99q)
2.
• Press
Start
Pad.
►Cooking time appears
in the display and
begins to count down.
S/art
NOTES ON POPCORN PAD:
1. Use prepackaged
room temperature
microwave popcorn. Read manufacturers'
instructions.
2. Place bag in oven according to manufac
turers' directions.
3. Pop only one bag at a time.
4. After popping, aliow the contents of the
bag to cool for a few minutes before
opening. Open bag carefully away from
face and body because popcorn and
steam are extremely hot.
5. Do not reheat unpopped kernels or reuse bag.
6.
NEVER
leave oven unattended when
popping popcorn.
REMARK:
When popping multiple bags one
right after the other, the cooking times may
vary slightly. This does not affect hte pop
corn results.
CAUTION:
If pre-packaged popcorn is a dif
ferent weight than is recommended, do not
use the popcorn setting, or inadequate pop-
K
or a fire may occur. Follow the manu-
jrers' instructions.
Power & Time Setting
How do I program Power and Time?
Example:
To cook at P 6 (MEDIUM) Power
for 1 minute 30 seconds
1.
( Pow^r L&V9i
\
• Select
Power Level.
(according to the
chart below)
Press 5 times.
2.
• Set Cooking Time
□ □□
using number pads.
3.
• Press.
S/arf
►Cooking will start. The
time on the screen
will count down.
Press
Power Level
once
PIO (HIGH)
twice
P9
3 times
P8
4 times
P7 (MEDIUM-HIGH)
5 times
P 6 (MEDIUM)
6 times
P5
7 times
P 4
8 times
P 3 (MEDIUM-LOW)
9 times
P2
10 times
P 1 (LOW)
NOTES:
1 .For more than one stage cooking, repeat
steps 1 and 2 for each stage of cooking
before pressing
Start
Pad.
2. When selecting P10 (HIGH) power for the
first stage, you may begin at step 2.
3. Two beeps will sound between each stage
of programming. Five beeps will sound at
the end of the enrire sequence.
4. When selecting P10 (HIGH) power, the
maximum programmable time is 30 min
utes.
For other power levels, the maximum time
is 99 minutes and 99 seconds.
5. For reheating, use P10 (HIGH) for liquids,
P7 (MEDIUM-HIGH) for most foods and
P6 (MEDIUM) for dense foods.
6. For defrosting, use P3 (MEDIUM-LOW).