Panasonic NI-33GX User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

FABRIC IRONING CHART

NOTES:1. Check garment for specific ironing instructions. Always follow

manufacturer's instructions.

2. Iron blended fabrics at setting for lower-temperature fiber or for the

highest-percentage fiber.

3. Use caution, some synthetics may melt at high temperature. .

Temperature

Selector Setting

Fabric

Ironing Recommendations

ACRYLIC
♦ ACRILAN
♦CRESLAN
♦ ORLON
ACETATE

METALLICS
SUEDE

Dry iron on wrong side, or use a press cloth on

. top of fabric Don't sprinkle water directly on

. fabric to avoid spots.

To iron suede, cover ironing board with brown

paper and use it as a press cloth.

NYLON
♦ANTORON

♦CAPROLAN

SILK

Dry iron on wrong side.

PERM. PRESS
RAYONS

POLYESTER

♦ DACRON
♦FORTREL
♦KODEL

TRIACETATE

♦ ARNEL
W’n W COTTON

Dry iron on wrong side. To touch-up collars,

cuffs, pockets, etc., iron lightly on right side.

WOOL
VELVET

Steam ironing is suggested. Never iron

completely dry. To iron velvet, steam iron

holding the iron slightly above the fabric.

COTTON

,, Steam ironing is suggested. Sprinkle water on

the fabric, depending on its thickness. Iron dark

fabrics on wrong side to avoid unwanted sheen.

LINEN

Steam ironing is suggested. Iron dark fabrics on

wrong side to avoid unwanted sheen.

♦ Trademarks of Fiber Manufacturers.