Before use, Parts identification, Charging – Panasonic ES8080 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before use
This Wet/Dry shaver can be used for
wet shaving with shaving lather or for
dry shaving. You can use this water
tight shaver in the shower and dean
it in water. Treat yourself to wet lather
shaves for at least three weeks and
notice the difference. Your Panasonic
Wet/Dry shaver requires a little time
to get used to because your skin and
beard need about a month to adjust
to any new shaving method.
Charge the shaver for at least 8 hours
before using it for the first time or
when it has not been in use for more
than six months.
Parts identification
(see fig. 1)
® Protective cap
(g)
System outer foil
© System outer foil release but
tons
© Inner blades
© Shaving mode selector
© Mode indicator
© Battery capacity monitor/
Charge status lamp
@ Switch button
® Trimmer
® Trimmer switch
® Charging adaptor with auto
matic voltage adjustment
© Charging adaptor holder
Rotatable stand
(N) Soft case
Charging
(see fig. 1, 2)
Lift up the charging adapter holder
when charging the shaver. (See fig.
1(A))
(Restore the charging adaptor holder
when carrying the unit.) (See fig.
1(B))
When using the charging adaptor,
rotate the stand at the base of the
charging adaptor to ensure that it is
stable. (See fig. 1(C))
Place the charging adaptor upright
on a flat surface. Plug the adaptor
into an AC outlet.
It will adjust automatically to voltages
between 100-120 and 220-240V AC.
In some areas, a special plug adap
tor may be required.
Switch the shaver off and place it up
right into the charging adaptor with
the switch facing toward the front.
The charge status lamp will glow
when the shaver is placed on the
correct position. It will flash when the
charging is completed.
At the same time, the battery capac
ity monitor will display the fully
charged condition (see fig. 2 (A)). The
system will turn off in about 10 min
utes after the charging has' been
completed (see fig. 2 (B)).
You can fully charge the shaver in 1
hour if the battery capacity monitor
flashes down to the 20% level.
A full charge will supply enough
power tor about 14 shaves (three
minutes per shave for a normal
beard).
You can always store your shaver in
the charging adaptor to maintain full