Panasonic MC-E871 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
B-10) Dust bag check indicator
: The dust bag check indicator is a visual aid to
: advise you of the condition of the dust bag. A
: red mark \A/ill appear in the window when
; airflow through the bag is insufficient. When
i this happens, check the paper bag, it may be
i full or blocked with fine dust and needs to be
I
replaced, (see paragraph D*1).
i
NOTE: If after having replaced the bag, the
I red mark continues to appear in the window,
I check to see if the hose, tube or suction inlet is
; blocked.
C) HOW TO STORE YOUR GLEANER
For easy storage and transporting, the vacuum cleaner includes a
clip system built onto the body of the cleaner, which will keep the
extension tube, hose and nozzle in a vertical position.
D) IVlAINtENANCE AND SERVICING
A
D-1)How to replace the dust bag
IMPORTANT NOTE: Before servicing any part, always DISCONNECT the cleaner from
the electricity supply.
1) Release the hook as shown by the arrow and
lift the cover up.
Note: When lifting the cover up, keep your
hand away from the rear side of the cover to
avoid injury.
2) Grip the cardboard of the dust bag and pull it out.
3) Install the new dust bag placing the cardboard
into the guides of the dust bag support.
Before closing the cover, make sure all edges
of the
dust
bag are inside the bag
compartment.
4) Close the dust cover.
IMPORTANT: When the dust bag is not in position or
it has not been installed correctly, the dust cover will
not close.
We recommend the use of genuine Panasonic bags Type C-2E only.