Panasonic KX-TM80-B - Manual (Page 27)

Problem Remedy
You cannot operate the
answering function from a
touch tone phone.
oTurn the answering function on (p. 24).
©Press your correct security code.
©Press a button after the greeting
message playback and a long beep.
©Press each button for more than
1 second to produce a long tone.
©In some areas, a remote touch tone
phone may not function due to
telephone line conditions.
1 cannot turn the unit on from
the touch tone phone.
©If no greeting message has been
recorded, you can not turn on the unit.
Record the greeting message before
hanging up (p. 24).
“Lo" is flashing on the
display.
After a power failure the
greeting message is lost.
©A battery is not installed in the unit or
battery power is low. Install a new
battery (p. 7, 25).
“Lo” is still flashing on the
display even when installing
a new battery.
©Disconnect the AC adaptor cord and
then reinsert it without removing the
battery, “Lo" will disappear after
10 seconds.
While operating the unit, the
AC adaptor feels warm.
©These are normal conditions.
1 cannot use the unit during a
power failure.
If you cannot solve your
problem.
©Call our customer satisfaction center at
201-348-9090.
27