Setting the correct time, 3 set the brightness selector to “high” or “low – Panasonic RCX230 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Correct Time
To set the correct time on the clock dis
play, use the following procedure.
Connect the AC power cord to
your household AC power out
let.
The clock display will begin to flash
continuously.
While pressing the radio
off/time set button, press and
hold the time set buttons until
the correct time appears on the
clock display.
The digits should stop flashing.
To fomard or reverse the displayed
time rapidly, press and hold the FAST
button with the FWD or REV button.
To forward or reverse the displayed
time minute by minute, press the
FWD or REV button repeatedly.
The seconds are automatically set to
“0” when the FWD or REV button is
pressed.
Observe the PM indicator, A green
dot (PM indicator) indicates “PM" and
no dot indicates "AM".
3
Set the brightness selector to
“HIGH” or “LOW”.
To increase the brightness of the time
display, set this selector to HIGH"; to
decrease it, set to “LOW".
The correct time can usually be obtained
by listening for time checks on the radio, or
from telephone time services.