P p i, Radio, Fm am – Panasonic RQ-SW33V User Manual
Page 4: Do. i
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RADIO
Concerning the hold function
This function prevents the unit from operat
ing even if one of the front panel buttons is
pressed in error.
During hold state
FM
И a button Is pressed.
1Ж
— nWIiT —
0
I ^------------------
To obtain better reception
FM
AM:
When a station is tuned in.
How to receive an FM broadcast clearly
Set FM RECEPTION to NORMAL.
When the FU reception is impaired, or there
is interference from a powerful station, set it
to CITY.
™
P P I
DO. I
Preset tuning
A total of 20 stations can be stored as
follows:
MODE 1: FM 1-5, AM 1-5
MODE 2: FM 1-5, AM 1-5
We recommend that you use MODE 1 for
daily use, and MODE 2 for travel.
■ Mode selection
Press and hold [wMODE] for more than
2 seconds.
“0"
(MODE 1) or
“0"
(MODE 2)
is shown on the display.
■ Memory presetting
1. Tune in the station to be stored.
2. Press and
hold one of
the memory
buttons ([1],
[2]. [3!, [4],
[5]) for
about
2 seconds.
3 beeps can be heard.
Memory
buttons
SB. '
I
a Ш
(L-
Memory
channel
To recall a preset station
Press a memory button {[1], [2], (3], 14], [5]).
•Release the button within 2 seconds.
When using overseas
Allocations need to be changed according to
the area.
Every time the following procedure is per
formed, the allocation setting changes as
follows:
FM0.2 MHz, AM 10 kHz*-
(original setting)
I
FM0.1 MHz, AM 10 kHz
1
FM0.05MHZ, AM9kHz-
■ How to adjust the allocation
settings
1. Press and hold [»MODE] to select the
mode (MODE 1 or MODE 2).
2. While pressing [ВАТТ CHECK], press'
and hold [» MODE] for about 3 seconds.!
•The changed allocation settings (FM
and then AM) are displayed.
Note:
Converting the allocation erases the stations'
previously stored in memory.
'